The Injection Agent
Injection Epoxy and Adhesive
In cooperation with National Starch and Chemical
Characteristics / KBK E-396
*The low viscosity of the epoxy allows injections
into minute fractures.
*The mixture has a long pot life allowing for slow
low-pressure injections.
*The cured epoxy will not shrink and exhibits high
physical properties.
*Despite its low viscosity, there is no discoloration.
*Conforms to JIS A6024-1992.
Properties
Product Number
Kane Pack
Category
Low-viscosity Injection Agent
Pedestal adhesive Fracture Seal
Use
Season Summer Winter Spring/Fall Year Round
Ideal
Temperature
Mix Ratio
|
Working
Life
(minutes)
(scale:0.5k)
Viscosity
(mPa.s)
Curing
Time
(hours)
(scale :0.5k)
10 hours
for 1mm thickness
24 hours
for 2mm thickness
Take note of
slower winter
curing times.
Performance
Specific
Gravity
Compression
Strength
(N/mm^2)
Tensile
Strength
(N/m^2)
Elongation
(%)
Bending
Strength
(N/mm^2)
Adhesive
Strength
Adhesive
Shear Strength
(metal on metal)
(n/mm^2)
Hardness
(Shore D)
<Attention>
Store indoors away from ignition points.
The seal will affect plastics,
particularly styrofoam.
Ensure adequate ventilation for indoor
applications. |